| EASY TO INSTALL
COMPRESSION-FIT |
|
|
|
|
| 1. Cut the header channel (A) to fit the inside of your window frame on the top and secure the channel in place. |  |
|
|
|
| 2. Drill a hole about 1/2" above the surface of the sill on each side for the latch to fit into. |  |
|
|
|
| 3. Press the movable sides in as you insert the window into the header channel (A) and then in one continuous motion insert the storm window into the opening. |  |
|
|
|
| 4. Be sure the latches are firmly secured into the holes provided for them at the bottom corners. |  |
|
|
|